Creality K2 Pro

21 December 2025 scouser

Creality K2 Pro – Detailed Review & Guide

Creality K2 Pro

High-Speed Multi-Color 3D Printer – Comprehensive Review & Guide

Price (USD) $599–$699

Price (GBP) £549–£629

Rating 4.5/5.0 ⭐⭐⭐⭐⭐

📋 Overview & Reviews

Last Updated: Based on reviews from the last 12 months (2024–2025)

Key Features

Up to 16-color printing with Creality’s multi-material hub
CoreXY high-speed motion system
Auto bed leveling with precision sensors
Large build volume: 250 × 250 × 260 mm
Wi-Fi and cloud printing support
Compatible with Creality Print, Cura, and OrcaSlicer

Community Reviews & Feedback

Positive Aspects:

Extremely flexible color system (up to 16 filaments)
Fast printing thanks to CoreXY architecture
Good print quality once tuned
Strong community support and modding ecosystem
Great for decorative and color-heavy models

Areas for Improvement:

Color hub requires tuning to avoid jams
Purge waste increases with high color counts
Firmware updates occasionally needed for stability
Noise levels higher than enclosed printers

🎯 Best Practices for Creality K2 Pro

Initial Setup

Assemble and secure the multi-color hub carefully
Run full auto-leveling and calibrate Z-offset
Check filament paths for smooth feeding
Update to the latest Creality firmware
Print a calibration cube to verify dimensional accuracy

Daily Maintenance

Clean the PEI plate with IPA before each print
Inspect hub filament paths for dust buildup
Check belts for proper tension weekly
Lubricate linear rails monthly
Monitor purge tower size for multi-color jobs

Material Handling

Use dry filament for best multi-color reliability
PLA and PETG recommended for multi-color jobs
Avoid TPU in the hub (too flexible)
Use filament guides to reduce drag

🖥️ Recommended Slicers

The Creality K2 Pro works best with the following slicers:

Creality Print (Official): Best integration with multi-color hub
OrcaSlicer: Excellent for advanced tuning and color workflows
Cura: Wide community support and profiles

⚙️ Optimal Slicer Settings

General Quality Settings

Setting	Recommended Value	Notes
Layer Height	0.2mm (standard), 0.12mm (high quality)	CoreXY handles fine layers well
Print Speed	120–200 mm/s	Reduce to 60 mm/s for multi-color precision
Travel Speed	250 mm/s	Helps reduce stringing
Retraction Distance	0.8–1.2 mm	Direct drive system
Retraction Speed	35–45 mm/s	Prevents blobs during color changes

Curved Top Surfaces (Top Layer Quality)

Top Layers: 6–8
Ironing: Recommended for PLA
Ironing Speed: 25–40 mm/s
Pattern: Concentric for smooth curves

Minimizing Layer Lines & Seams

Use “Aligned” seam for geometric models
Use “Random” for organic shapes
Enable pressure advance (input shaping)
Use adaptive layer height for curved models

Support Settings

Setting	Recommended Value
Support Type	Tree (Cura) or Organic (Orca)
Overhang Angle	50°
Support Density	10–12%
Top Distance	0.25 mm

🔧 Calibration Guide

Bed Leveling

Heat bed to 60°C
Run auto-leveling
Verify with a paper test
Adjust Z-offset if needed
Print a first-layer test

Extruder Calibration

Mark 120mm of filament
Extrude 100mm
Measure remaining filament
Adjust E-steps accordingly

Temperature Calibration

Print a temp tower for each filament brand
PLA: 200–215°C
PETG: 235–250°C

Flow Rate Calibration

Print a single-wall cube
Measure wall thickness
Adjust flow until accurate

⚠️ Common Issues & Solutions

Color Hub Jamming

Keep filament dry
Reduce retraction during color changes
Ensure PTFE paths are clean

Stringing

Increase travel speed
Lower print temperature by 5–10°C
Enable combing

Vibrations / Ghosting

Enable input shaping
Reduce acceleration for tall prints
Ensure printer is on a stable surface

Purge Tower Too Large

Reduce color change frequency in slicer
Use “Smart Purge” settings in Orca

📊 Material-Specific Recommendations

PLA

200–210°C nozzle, 60°C bed
Best for multi-color prints
Brands: eSun, Overture, Creality

PETG

240–250°C nozzle, 80°C bed
Use slower speeds to avoid stringing

ABS

Not recommended without enclosure
Prone to warping on open-frame printers

TPU

Not recommended in multi-color hub
Direct drive can print TPU alone

Sovol SV06

21 December 2025 scouser

Sovol SV06 – Detailed Review & Guide

Sovol SV06

Single Color 3D Printer – Comprehensive Review & Guide

Price (USD) $199

Price (GBP) £179

Rating 4.5/5.0 ⭐⭐⭐⭐⭐

Build Volume 220 x 220 x 250 mm

📋 Overview & Reviews

Last Updated: Based on reviews from the last 12 months (2024-2025)

Key Features

Type: Single Color
Build Volume: 220 x 220 x 250 mm
Automatic bed leveling system
Modern user interface
Wi-Fi connectivity
High-speed printing capability

Community Reviews & Feedback

Positive Aspects:

Excellent print quality for the price point
Reliable automatic bed leveling
Good build quality and construction
User-friendly setup process
Active community support

Areas for Improvement:

Some users report occasional calibration needs
Material compatibility varies by brand
May require fine-tuning for optimal results

🎯 Best Practices for Sovol SV06

Initial Setup

Ensure the printer is on a stable, level surface
Run the automatic bed leveling sequence before first print
Calibrate the Z-offset carefully for optimal first layer
Check all connections and ensure build plate is clean
Update firmware to the latest version

Daily Maintenance

Clean the build plate with isopropyl alcohol before each print
Check nozzle for clogs and clean if necessary
Inspect and clean the material feed system regularly
Monitor first layer adhesion on each print
Keep the build area clean from debris

Material Handling

Store filaments in a dry environment (consider a dry box)
Use high-quality filaments to reduce issues
Monitor material levels during long prints
Document optimal settings for each filament brand

🖥️ Recommended Slicers

The Sovol SV06 works best with the following slicers:

Cura: Most popular choice with excellent community support
PrusaSlicer: Excellent for advanced users with fine control
SuperSlicer: Great for users who want maximum customization
OrcaSlicer: Modern slicer with good features (Bambu Lab printers)

⚙️ Optimal Slicer Settings

General Quality Settings

Setting	Recommended Value	Notes
Layer Height	0.2mm (standard), 0.15mm (high quality)	Balance between quality and speed
First Layer Height	0.3mm	Better adhesion
Print Speed	50-60 mm/s	Reduce to 30-40 mm/s for first layer
Travel Speed	150 mm/s	Faster travel reduces stringing
Retraction Distance	1.5-2.0 mm	Adjust based on material
Retraction Speed	40-50 mm/s	Prevents stringing

Curved Top Surfaces (Top Layer Quality)

Top Layer Count: 5-7 layers for smooth surfaces
Top Surface Skin Layers: 2-3 layers
Ironing: Enable for ultra-smooth top surfaces (Cura)
Ironing Flow: 5-10%
Ironing Speed: 30-50 mm/s
Top Surface Pattern: Concentric or Lines for best results

Minimizing Layer Lines & Seams

Seam Position: Set to “Random” or “Aligned” based on model
Z-Seam Alignment: Use “Sharpest Corner” to hide seams
Layer Height: Use smaller layer heights (0.15mm or 0.1mm) for less visible lines
Adaptive Layer Height: Enable to vary layer height based on geometry
Variable Layer Height: Use thicker layers on straight sections, thinner on curves

Support Settings for Easy Removal

Setting	Recommended Value
Support Type	Tree supports (Cura) or Organic supports (PrusaSlicer)
Support Overhang Angle	45-50 degrees
Support Top Distance	0.2-0.3mm (1-2 layers)
Support Bottom Distance	0.2-0.3mm
Support Interface	Enable with 0.2mm spacing
Support Density	10-15% for most prints
Support Pattern	Grid or Zigzag

Tips for Support Removal:

Use support interface layers for easier removal
Increase support Z-distance slightly if supports are too difficult to remove
Consider using breakaway supports or PVA for complex overhangs
Print supports at lower density (10%) to reduce material usage and ease removal

🔧 Calibration Guide

Bed Leveling

Heat the bed to printing temperature (60°C for PLA)
Run the automatic bed leveling sequence from the printer menu
Manually verify leveling using a piece of paper at all four corners
Adjust Z-offset until paper has slight resistance when moving
Test with a first layer calibration print

Extruder Calibration

Mark 120mm of filament from the extruder entry point
Extrude 100mm through the printer menu
Measure the remaining filament
Calculate: New E-steps = (Old E-steps × 100) / Actual Extruded
Update E-steps in printer firmware or slicer

Temperature Calibration

Print a temperature tower for each new material
Test range: 190-220°C for PLA, 240-260°C for PETG
Choose temperature with best layer adhesion and surface quality
Document optimal temperatures for each filament brand

Flow Rate Calibration

Print a single-wall calibration cube
Measure wall thickness with calipers
Adjust flow rate: New Flow = (Expected Width / Actual Width) × 100
Re-test until wall thickness matches expected value

⚠️ Common Issues & Solutions

Stringing

Solution: Increase retraction distance to 2.0-2.5mm
Solution: Increase retraction speed to 45-50 mm/s
Solution: Enable “Wipe while retracting” in slicer
Solution: Reduce print temperature by 5-10°C
Solution: Increase travel speed to minimize time between layers

Lack of Adhesion (First Layer Issues)

Solution: Clean build plate thoroughly with isopropyl alcohol
Solution: Adjust Z-offset to be closer to bed (reduce gap)
Solution: Increase first layer temperature by 5-10°C
Solution: Reduce first layer speed to 20-30 mm/s
Solution: Use adhesion aids: hairspray, glue stick, or PEI sheet
Solution: Ensure bed temperature is correct (60°C for PLA, 80°C for PETG)

Support Issues

Solution: Increase support top/bottom distance to 0.3mm
Solution: Use tree supports for better removal
Solution: Reduce support density to 10%
Solution: Enable support interface for easier removal
Solution: Adjust support overhang angle to 50 degrees

Layer Shifting

Solution: Check belt tension and tighten if loose
Solution: Reduce print speed, especially for tall prints
Solution: Ensure printer is on stable surface
Solution: Check for mechanical obstructions

Clogging

Solution: Use high-quality, dry filament
Solution: Perform cold pulls to clear clogs
Solution: Check nozzle temperature is appropriate for material
Solution: Clean nozzle regularly with wire brush
Solution: Ensure proper material flow and no kinks in filament

Warping

Solution: Use enclosed chamber if available (keep doors closed)
Solution: Increase bed temperature
Solution: Use brim or raft for better adhesion
Solution: Avoid drafts and temperature fluctuations
Solution: Consider using ABS-specific settings or switch to PETG

📊 Material-Specific Recommendations

PLA

Temperature: 200-210°C nozzle, 60°C bed
Speed: 50-60 mm/s
Retraction: 1.5-2.0mm at 40-50 mm/s
Best Brands: Sunlu, Flashforge, Bambu Labs, Hatchbox

PETG

Temperature: 240-250°C nozzle, 80°C bed
Speed: 40-50 mm/s
Retraction: 2.0-3.0mm at 35-40 mm/s
Best Brands: Sunlu, Overture, Polymaker

ABS

Temperature: 240-260°C nozzle, 90-100°C bed
Speed: 40-50 mm/s
Retraction: 2.0-3.0mm at 40 mm/s
Note: Requires enclosed chamber, good ventilation

TPU (Flexible)

Temperature: 220-230°C nozzle, 50-60°C bed
Speed: 20-30 mm/s (slow)
Retraction: Minimal (0.5-1.0mm) or disable
Note: Use direct drive if possible, reduce flow rate

3D Printer Calibration Guide

21 December 2025 scouser

3D Printer Calibration Guide

Step-by-step guide to calibrating your 3D printer for optimal results

🎯 Initial Setup & Calibration Checklist

Follow these steps in order for best results:

Mechanical Assembly Check
Bed Leveling
Z-Offset Calibration
Extruder E-Steps Calibration
Temperature Calibration
Flow Rate Calibration
Retraction Calibration
First Layer Test

🔧 Step 1: Mechanical Assembly Check

Before calibration, ensure your printer is properly assembled:

Frame & Structure

Check all frame connections are tight
Ensure printer is on a stable, level surface
Verify gantry is square and parallel to bed
Check for any loose screws or bolts

Belt Tension

Belts should be tight but not overly tight
Should produce a low “twang” when plucked
Too loose = layer shifting, too tight = premature wear
Check both X and Y axis belts

Wheels & Rails

Wheels should roll smoothly without binding
Adjust eccentric nuts to eliminate play
Clean rails and wheels of debris
Lubricate linear rails if applicable

📐 Step 2: Bed Leveling

Proper bed leveling is critical for good first layer adhesion.

Manual Bed Leveling (4-Point)

Step 1: Heat bed to printing temperature (60°C for PLA)

Step 2: Home all axes (X, Y, Z)

Step 3: Disable stepper motors (allows manual movement)

Step 4: Move nozzle to each corner (front-left, front-right, back-right, back-left)

Step 5: Use a piece of paper (0.1mm thick) between nozzle and bed

Step 6: Adjust bed leveling screws until paper has slight resistance when moving

Step 7: Repeat process 2-3 times (adjusting one corner affects others)

Step 8: Check center of bed – may need mesh leveling if warped

Automatic Bed Leveling (ABL)

Run ABL sequence from printer menu
Most modern printers have this feature
Probes multiple points on bed surface
Creates mesh to compensate for bed warping
Still requires initial manual leveling for best results

💡 Pro Tip: Use a feeler gauge (0.1mm or 0.2mm) for more precise leveling than paper. Also, level the bed at printing temperature, as heat can cause slight expansion.

📏 Step 3: Z-Offset Calibration

Z-offset determines the distance between nozzle and bed when “at zero”.

Calibration Process

Step 1: Home Z-axis

Step 2: Heat bed and nozzle to printing temperatures

Step 3: Move Z to 0.1mm (or your first layer height)

Step 4: Place paper between nozzle and bed

Step 5: Adjust Z-offset until paper has slight resistance

Step 6: Print a first layer test (large square, single layer)

Step 7: Adjust Z-offset based on results:

Lines too thin/transparent = too close (increase Z-offset)
Lines not sticking = too far (decrease Z-offset)
Lines smooth and slightly squished = perfect

First Layer Test Print

Print a large single-layer square (50x50mm)
Observe the first layer as it prints
Lines should be slightly squished but not transparent
No gaps between lines
Good adhesion to bed

⚙️ Step 4: Extruder E-Steps Calibration

Ensures the correct amount of filament is extruded.

Calibration Process

Step 1: Heat nozzle to printing temperature (200°C for PLA)

Step 2: Mark filament 120mm from extruder entry point

Step 3: Extrude 100mm of filament through printer menu

Step 4: Measure remaining distance from mark to entry point

Step 5: Calculate actual extruded amount:
Actual Extruded = 120mm - Measured Distance

Step 6: Calculate new E-steps:
New E-steps = (Current E-steps × 100) / Actual Extruded

Step 7: Update E-steps in printer firmware or save to EEPROM

Step 8: Repeat process to verify accuracy

💡 Pro Tip: Perform this calibration with the nozzle hot and filament loaded, as cold extrusion can give inaccurate results. Also, ensure there’s no resistance from the filament path.

🌡️ Step 5: Temperature Calibration

Find optimal printing temperature for each material and brand.

Temperature Tower Test

Download or create a temperature tower STL
Configure slicer to change temperature at each section
Print tower with temperature range (e.g., 190-220°C for PLA)
Examine each section for:
- Layer adhesion quality
- Surface smoothness
- Overhang quality
- Stringing amount
Choose temperature with best overall quality

Material-Specific Ranges

PLA: 190-220°C (typically 200-210°C optimal)
PETG: 230-250°C (typically 240-245°C optimal)
ABS: 240-260°C (typically 250°C optimal)
TPU: 220-230°C

⚠️ Note: Optimal temperature varies by brand, color, and even batch. Always test new filaments with a temperature tower.

💧 Step 6: Flow Rate Calibration

Ensures correct amount of material is extruded during printing (different from E-steps).

Single-Wall Calibration Cube

Step 1: Create or download a single-wall calibration cube (20x20mm, 0.4mm wall)

Step 2: Print cube with 0% infill, 1 perimeter

Step 3: Measure wall thickness with calipers at multiple points

Step 4: Calculate average wall thickness

Step 5: Calculate new flow rate:
New Flow Rate = (Expected Width / Actual Width) × 100
Example: (0.4mm / 0.42mm) × 100 = 95.2%

Step 6: Update flow rate in slicer (usually under Material settings)

Step 7: Re-print and verify wall thickness is correct

Expected Values

0.4mm nozzle: 0.4mm wall thickness (or slightly less)
0.6mm nozzle: 0.6mm wall thickness
Flow rate typically 90-110%
Too high = over-extrusion (elephant’s foot, blobs)
Too low = under-extrusion (gaps, weak parts)

🔄 Step 7: Retraction Calibration

Prevents stringing and oozing between print sections.

Retraction Test Print

Download a retraction test tower (multiple towers at different heights)
Or use a model with multiple separate parts
Print with varying retraction distances
Examine for stringing between parts

Calibration Process

Step 1: Start with recommended retraction for your setup:

Direct drive: 1.5-2.5mm
Bowden: 4-6mm

Step 2: Print retraction test

Step 3: If stringing persists:

Increase retraction distance by 0.5mm
Increase retraction speed (up to 50 mm/s)
Enable “Wipe while retracting”

Step 4: If under-extrusion or gaps:

Decrease retraction distance
Decrease retraction speed

Step 5: Fine-tune until minimal stringing with good layer adhesion

Additional Stringing Solutions

Reduce print temperature by 5-10°C
Increase travel speed
Enable “Coasting” in Cura
Use “Z-hop” sparingly (can cause other issues)

✅ Step 8: First Layer & Overall Quality Test

Final verification that everything is calibrated correctly.

First Layer Test

Print a large first layer (100x100mm square, single layer)
Check for:
- Even layer height across entire bed
- No gaps between lines
- Good adhesion (should be difficult to remove when hot)
- Smooth, slightly squished appearance

Calibration Cube

Print a 20x20x20mm calibration cube
Measure dimensions with calipers
Should be within 0.1mm of expected dimensions
Check for:
- Accurate dimensions (X, Y, Z)
- Smooth surfaces
- Sharp corners
- Minimal layer lines

Benchy Test

Print the famous 3D Benchy test model
Comprehensive test of all printer capabilities:
- Overhangs
- Bridges
- Surface quality
- Dimensional accuracy
- Stringing
- Layer adhesion

🔄 Maintenance Calibration Schedule

Before Every Print: Quick bed level check
Weekly: Full bed leveling, check belt tension
Monthly: E-steps check, mechanical inspection
When Changing Materials: Temperature and retraction tests
After Maintenance: Full calibration sequence

💡 Pro Tip: Keep a calibration log! Document your optimal settings for each material and brand. This saves time when switching between filaments and helps identify when something needs recalibration.

3D Printing Troubleshooting Guide

21 December 2025 scouser

3D Printing Troubleshooting Guide

Common problems and their solutions

🧵 Stringing / Oozing

Symptoms: Thin strings of plastic between separate parts of your print

Solutions (in order of effectiveness):

1. Increase Retraction Distance: Add 0.5-1.0mm to current retraction distance

2. Increase Retraction Speed: Set to 40-50 mm/s (faster retraction)

3. Reduce Print Temperature: Lower by 5-10°C (less oozing when idle)

4. Increase Travel Speed: Faster travel = less time for oozing

5. Enable “Wipe While Retracting”: Cleans nozzle before travel moves

6. Enable “Coasting” (Cura): Stops extruding slightly before end of line

7. Use “Z-Hop”: Lifts nozzle during travel (use sparingly, can cause other issues)

8. Check Filament Quality: Moist filament causes more stringing – dry if needed

💡 Pro Tip: Print a retraction test tower to systematically find optimal retraction settings. Test one variable at a time.

📌 Lack of Adhesion (First Layer Issues)

Symptoms: Print doesn’t stick to bed, corners lifting, warping

Solutions:

1. Clean Build Plate: Use isopropyl alcohol (90%+) to remove oils and debris

2. Adjust Z-Offset: Nozzle too far from bed – decrease Z-offset (move closer)

3. Level Bed Properly: Re-level bed at printing temperature

4. Increase Bed Temperature: Raise by 5-10°C (60°C for PLA, 80°C for PETG)

5. Reduce First Layer Speed: Print first layer at 20-30 mm/s

6. Increase First Layer Temperature: Print first layer 5-10°C hotter

7. Use Adhesion Aids:

Hairspray (aqua net or similar)
Glue stick (PVA-based)
PEI sheet (best long-term solution)
Blue painter’s tape (for some materials)

8. Use Brim or Raft: Increases contact area with bed

Brim: 5-10mm width for small parts
Raft: For very difficult prints

9. Check Bed Surface: Some materials need specific surfaces (PEI for PETG, glass for PLA)

10. Avoid Drafts: Close enclosure doors, avoid fans/AC blowing on printer

⚠️ Note: If using glue stick or hairspray, clean bed regularly as buildup can cause issues. PEI sheets are the best long-term solution.

🏗️ Support Issues

Symptoms: Supports too difficult to remove, supports fusing to model, poor support quality

Solutions:

1. Increase Support Z-Distance: Increase top distance to 0.3mm (1-2 layers)

2. Use Tree/Organic Supports: Much easier to remove than traditional supports

3. Reduce Support Density: Lower to 10-15% (enough support, easier removal)

4. Enable Support Interface: Creates separation layer between support and model

5. Adjust Support Overhang Angle: Only support angles >45-50 degrees

6. Use Breakaway Supports: Some slicers support this (e.g., PrusaSlicer)

7. Let Print Cool: Wait for print to cool completely before removing supports

8. Use Support Removal Tools:

Flush cutters for initial removal
Tweezers for small remnants
Needle-nose pliers for stubborn supports

9. Consider Orientation: Rotate model to minimize support needs

10. Use PVA Supports (Dual Extrusion): Dissolves in water (if available)

💡 Pro Tip: Tree supports use less material and are much easier to remove. Always prefer them over traditional grid supports when your slicer supports them.

📏 Layer Shifting

Symptoms: Layers misaligned, print shifted to one side

Solutions:

1. Check Belt Tension: Belts should be tight but not overly tight

2. Reduce Print Speed: Too fast can cause missed steps, especially on tall prints

3. Check for Obstructions: Ensure nothing is blocking X/Y axis movement

4. Stabilize Printer: Place on solid, level surface (avoid wobbly tables)

5. Check Stepper Motor Current: Too low = missed steps, too high = overheating

6. Reduce Acceleration: Lower acceleration/jerk settings in firmware

7. Check Pulleys: Ensure set screws on pulleys are tight

8. Inspect Rails/Wheels: Clean and lubricate if needed, check for flat spots

⚠️ Warning: If layer shifting happens at the same height every time, check for a mechanical obstruction at that height (cable, bracket, etc.).

🚫 Clogging / Under-Extrusion

Symptoms: Thin layers, gaps in print, filament not coming out

Solutions:

1. Perform Cold Pull: Heat to 230°C, push filament, cool to 90°C, pull out

2. Clean Nozzle: Use wire brush while hot, or replace nozzle if damaged

3. Check Filament Quality: Use high-quality, dry filament (moisture causes clogs)

4. Verify Temperature: Too low = clogging, too high = oozing

5. Check Extruder: Ensure extruder gear is gripping filament properly

6. Check for Kinks: Ensure filament path is clear, no sharp bends

7. Increase Flow Rate: If consistently under-extruding, increase flow to 105-110%

8. Check PTFE Tube (Bowden): Ensure tube is cut square and seated properly

9. Replace Nozzle: If damaged or worn (especially with abrasive materials)

10. Dry Filament: Use filament dryer or oven (low temp) to remove moisture

💡 Pro Tip: Keep a spare nozzle on hand. Nozzles are cheap and often the culprit. Also, use a filament dryer for materials like PETG, TPU, and PC that absorb moisture easily.

🌊 Warping

Symptoms: Corners lifting from bed, bottom layer curling

Solutions:

1. Use Enclosure: Keep ambient temperature stable (especially for ABS)

2. Increase Bed Temperature: Higher bed temp reduces warping

3. Use Brim: 5-10mm brim increases adhesion area

4. Avoid Drafts: Close enclosure, turn off fans/AC near printer

5. Use Raft: For severe warping issues (sacrifices bottom surface quality)

6. Reduce Bed Temperature Gradually: Don’t cool bed too quickly after print

7. Use Adhesion Aids: Hairspray, glue stick, or PEI sheet

8. Consider Material: PLA warps less than ABS – switch if possible

9. Add Mouse Ears: Small discs at corners to increase adhesion

10. Print Slower First Layer: Better adhesion = less warping

🐘 Elephant’s Foot

Symptoms: Bottom layers wider than rest of print, bulging at base

Solutions:

1. Increase Initial Layer Horizontal Expansion: Use negative value (-0.1 to -0.3mm)

2. Reduce Bed Temperature: Lower bed temp after first few layers

3. Increase Z-Offset: Slightly increase distance from bed

4. Reduce Flow Rate: Slightly reduce flow for first layer (95-98%)

5. Use Chamfer: Design model with slight chamfer at bottom

💧 Over-Extrusion

Symptoms: Blobs, zits, rough surfaces, dimensional inaccuracy

Solutions:

1. Reduce Flow Rate: Lower to 90-95% in slicer

2. Calibrate E-Steps: Ensure extruder is calibrated correctly

3. Reduce Temperature: Lower by 5-10°C (less material flow)

4. Check Nozzle Size: Ensure slicer nozzle size matches actual nozzle

5. Reduce Line Width: Slightly reduce if consistently over-extruding

📐 Dimensional Inaccuracy

Symptoms: Parts not matching expected dimensions

Solutions:

1. Calibrate E-Steps: Ensure correct extrusion amount

2. Calibrate Flow Rate: Use single-wall test to find correct flow

3. Check Belt Tension: Loose belts cause dimensional issues

4. Verify Steps/mm: Check X, Y, Z steps per mm in firmware

5. Account for Shrinkage: Some materials (ABS) shrink – scale model accordingly

6. Check Mechanical Play: Eliminate any play in axes

🔊 Noisy Printing

Symptoms: Loud stepper motors, vibrations, rattling

Solutions:

1. Enable Stepper Drivers: Use TMC drivers with StealthChop (silent mode)

2. Reduce Acceleration: Lower acceleration reduces noise

3. Dampen Vibrations: Place printer on foam pad or vibration dampers

4. Tighten Loose Parts: Check for rattling screws or brackets

5. Lubricate Moving Parts: Properly lubricated parts run quieter

💡 Pro Tip: Keep a troubleshooting log! Document what problems you encounter and what solutions worked. This helps you quickly resolve recurring issues and improves your printing skills over time.

Free STL File Sources for Beginners

21 December 2025 scouser

Free STL File Sources for Beginners

Best places to find free 3D models for printing (2024-2025)

🌟 Top Recommended Sites for Beginners

Thingiverse

URL: www.thingiverse.com

Best For: Largest collection, wide variety, beginner-friendly

Description: The largest repository of free 3D printable files with millions of models. Great for beginners due to extensive categories and search functionality.

Categories: Toys Household Gadgets Art Tools

Pros: Huge selection, free, easy to search, many beginner-friendly models

Cons: Some models may need cleanup, quality varies

Printables (by Prusa)

URL: www.printables.com

Best For: High-quality models, well-organized, modern interface

Description: Prusa’s modern platform with curated, high-quality models. Excellent organization and community features.

Categories: Functional Decorative Toys Tools

Pros: High quality models, modern interface, good organization, rewards program

Cons: Smaller collection than Thingiverse (but growing)

Cults3D

URL: cults3d.com

Best For: Mix of free and paid models, artistic designs

Description: Platform with both free and premium models. Good for finding unique artistic and functional designs.

Categories: Art Jewelry Miniatures Functional

Pros: Unique designs, mix of free/paid, good for art pieces

Cons: Some models are paid, need to filter for free

MyMiniFactory

URL: www.myminifactory.com

Best For: Tested models, miniatures, high-quality prints

Description: Curated platform where models are tested before publishing. Excellent for reliable, print-ready files.

Categories: Miniatures Toys Art Functional

Pros: Tested models, high quality, reliable prints

Cons: Mix of free and paid, smaller free selection

Thangs

URL: thangs.com

Best For: Modern search, 3D preview, collaborative platform

Description: Modern platform with advanced 3D search and preview capabilities. Great for finding similar models.

Categories: All Categories

Pros: 3D search, modern interface, good preview tools

Cons: Smaller community than Thingiverse

🎯 Beginner-Friendly Model Categories

Best Models to Start With:

Calibration Cubes: Test your printer’s accuracy (20x20x20mm cubes)
3D Benchy: The famous boat test model – comprehensive printer test
Simple Vases: Single-wall prints, no supports needed
Keychains: Small, quick prints, great for testing
Phone Stands: Functional, simple designs
Desk Organizers: Practical, usually no supports
Cookie Cutters: Simple shapes, fun to use
Planters: Larger prints, good for learning

Models to Avoid as a Beginner:

Complex models with many supports
Very large prints (start smaller)
Models requiring specific materials (start with PLA)
Multi-part assemblies (learn basics first)
Models with very fine details (may need tuning)

🔍 How to Search for Models

Search Tips:

Use Specific Keywords: “phone stand iPhone 14” vs “stand”
Filter by License: Look for “Free” or “CC0” licenses
Check Print Settings: Look for recommended settings in descriptions
Read Comments: See what others say about printability
Check Print Time: Start with shorter prints (under 2 hours)
Look for “No Supports”: Easier for beginners
Check File Formats: Ensure STL or 3MF files are available

What to Look For in Model Descriptions:

Recommended print settings (temperature, speed, layer height)
Support requirements (none, some, or tree supports)
Material recommendations (PLA, PETG, etc.)
Print time estimates
Required print volume
Assembly instructions (if multi-part)
Post-processing requirements

📚 Specialized Model Sources

GrabCAD

URL: grabcad.com

Best For: Engineering parts, technical models, CAD files

Great for functional parts, mechanical components, and engineering projects.

Yeggi

URL: www.yeggi.com

Best For: Search engine for multiple STL sites

Meta-search engine that searches across multiple 3D model repositories at once.

NIH 3D Print Exchange

URL: 3dprint.nih.gov

Best For: Medical and scientific models

Free models related to medicine, anatomy, and scientific visualization.

NASA 3D Resources

URL: nasa3d.arc.nasa.gov

Best For: Space-related models, rockets, satellites

Official NASA repository of 3D models from space missions and research.

🎨 Creative & Artistic Sources

Sketchfab

URL: sketchfab.com

Best For: 3D art, sculptures, detailed models

Large collection of 3D art and models, many available for download. Filter by “Downloadable” and “3D Printable”.

Pinshape

URL: pinshape.com

Best For: Mix of free and premium artistic models

Platform with artistic and functional designs, good search functionality.

🛠️ Functional & Practical Models

Best Categories for Practical Prints:

Organizers: Desk organizers, drawer dividers, cable management
Tools: Wrenches, measuring tools, jigs
Replacement Parts: Broken appliance parts, custom brackets
Household Items: Hooks, brackets, clips, containers
Garden: Planters, garden markers, tool holders
Kitchen: Cookie cutters, measuring tools, organizers

📥 Downloading & Preparing Files

File Formats:

STL: Most common, works with all slicers
3MF: Modern format with more information (preferred)
OBJ: Less common, may need conversion

Before Printing:

Check File in Slicer: Open in your slicer to preview
Verify Scale: Ensure model is correct size
Check Orientation: Rotate if needed for best print quality
Review Supports: Add supports if needed
Check Print Time: Make sure you have time for the print
Verify Material: Ensure you have the right filament

Common Issues & Solutions:

Model Too Large: Scale down in slicer (maintain aspect ratio)
Model Has Errors: Use “Repair” function in slicer or MeshMixer
Missing Details: May need smaller layer height or different orientation
Requires Supports: Enable supports in slicer settings

⭐ Recommended First Prints

Essential Test Prints:

Calibration Cube (20x20x20mm): Test dimensional accuracy
3D Benchy: Comprehensive printer test
Temperature Tower: Find optimal temperature for your filament
Retraction Test: Tune retraction settings
First Layer Test: Verify bed leveling and Z-offset

Fun Beginner Projects:

Simple keychain with your name
Phone stand
Desk organizer
Cookie cutter
Simple vase
Plant pot
Bookmark
Coaster

💡 Pro Tip: Start with models marked “No Supports Required” and “Beginner Friendly”. Read the comments section – other users often share their print settings and tips. Also, don’t be afraid to scale models down for faster test prints before committing to a full-size print.

Slicer Best Practices Guide

21 December 2025 scouser

Slicer Best Practices Guide

Comprehensive guide to getting the best results from popular 3D printing slicers

🖥️ Cura

Best For: Beginners and intermediate users, wide printer compatibility

Key Features

User-friendly interface with preset profiles
Extensive printer and material profiles
Active community and plugin support
Regular updates and improvements

Best Practices

Start with Presets: Always begin with the recommended profile for your printer
Enable Advanced Settings: Switch to “Expert” mode for full control
Use Custom Profiles: Save successful settings as custom profiles
Layer Preview: Always review layer-by-layer preview before printing
Support Settings: Use tree supports for easier removal

Optimal Settings for Quality Prints

Setting	Recommended Value	Purpose
Layer Height	0.2mm (standard), 0.15mm (high quality)	Balance quality vs speed
Wall Line Count	3-4 walls	Strength and surface quality
Top/Bottom Layers	5-7 layers	Smooth top surface
Infill Pattern	Gyroid or Cubic	Strength and material efficiency
Infill Density	15-20% (general), 50%+ (strong parts)	Balance strength and material use
Print Speed	50-60 mm/s	Optimal quality/speed balance
Initial Layer Speed	20-30 mm/s	Better first layer adhesion
Retraction Distance	1.5-2.5mm (direct drive), 4-6mm (Bowden)	Reduce stringing
Retraction Speed	40-50 mm/s	Effective stringing prevention

Curved Top Surfaces (Ironing)

Enable “Enable Ironing” in experimental settings
Set Ironing Flow to 5-10%
Ironing Speed: 30-50 mm/s
Iron Only Top Layer: Enabled
Use with 5-7 top layers for best results

Minimizing Layer Lines

Use Adaptive Layer Height for varying geometry
Enable “Smooth Spiralized Contours” for vases
Set Z-Seam Alignment to “Sharpest Corner”
Use “Random” seam position for organic shapes
Reduce layer height to 0.15mm or 0.1mm for smoother surfaces

Support Settings

Support Type: Tree supports (easier removal)
Support Overhang Angle: 45-50 degrees
Support Z Distance: 0.2-0.3mm (1-2 layers)
Support Interface: Enable with 0.2mm spacing
Support Density: 10-15%
Support Pattern: Grid or Zigzag

Pro Tip: Use Cura’s “Print Thin Walls” feature for detailed models, and enable “Coasting” to reduce stringing on complex prints.

🖥️ PrusaSlicer

Best For: Advanced users, Prusa printers, fine-tuned control

Key Features

Advanced customization options
Excellent support generation (Organic supports)
Multi-material support
Modifier meshes for per-region settings

Best Practices

Use Presets: Start with manufacturer presets
Modifier Meshes: Use for region-specific settings
Organic Supports: Prefer over traditional supports
Variable Layer Height: Use for optimal quality/speed
Export Settings: Save profiles for different materials

Optimal Settings

Setting	Recommended Value	Purpose
Layer Height	0.2mm (Quality), 0.15mm (Draft)	Print quality
Perimeters	3-4 perimeters	Wall strength
Top Solid Layers	5-7 layers	Smooth top surface
Bottom Solid Layers	4-5 layers	Base strength
Infill Pattern	Gyroid or Cubic	Strength and efficiency
Infill Density	15-20% (general use)	Material efficiency
Print Speed	45-60 mm/s	Quality/speed balance
First Layer Speed	20-30 mm/s	Adhesion
Retraction Length	1.5-2.5mm (direct), 4-6mm (Bowden)	Stringing prevention

Curved Top Surfaces

Increase Top Solid Layers to 7-10 for curved surfaces
Use Variable Layer Height: thinner on curves (0.1mm), thicker on straight sections (0.2mm)
Enable “Ironing” in Print Settings → Layers and perimeters
Set Ironing Flow to 5-10%
Use Concentric top fill pattern for organic shapes

Minimizing Seams

Set Seam Position to “Aligned” or “Rear”
Use “Random” for organic models
Enable “Seam Gap” to reduce visibility
Use Variable Layer Height to minimize layer lines
Consider “Vase Mode” for single-wall prints

Organic Supports (Best Feature)

Enable “Organic Supports” in Support Material settings
Support Overhang Threshold: 45 degrees
Support Top Z Distance: 0.2mm
Support Bottom Z Distance: 0.2mm
Support Interface: Enable with 0.2mm spacing
Much easier to remove than traditional supports

Pro Tip: PrusaSlicer’s “Paint-on Supports” feature allows you to manually place supports exactly where needed, giving you complete control.

🖥️ SuperSlicer

Best For: Maximum customization, advanced users, fine-tuning

Key Features

Fork of PrusaSlicer with additional features
More granular control over settings
Advanced calibration tools
Better support for non-Prusa printers

Best Practices

Calibration Tools: Use built-in calibration prints
Advanced Settings: Explore all available options
Profile Management: Create detailed material profiles
Support Settings: Fine-tune support generation
Speed Settings: Optimize per-feature speeds

Unique Features

Advanced Calibration: Built-in temperature, retraction, and flow tests
Per-Feature Speeds: Different speeds for perimeters, infill, supports
Advanced Supports: More control over support generation
G-code Macros: Custom start/end g-code with variables

Optimal Settings

Similar to PrusaSlicer but with additional fine-tuning options:

Use calibration tools to find optimal settings for your printer
Set different speeds for different features (perimeters, infill, supports)
Use advanced support settings for complex models
Leverage per-region settings with modifier meshes

🖥️ FlashPrint (Flashforge Printers)

Best For: Flashforge printer owners, multi-color printing

Key Features

Optimized for Flashforge printers
Multi-color and multi-material support
Simple interface
Built-in profiles for Flashforge materials

Best Practices

Use official Flashforge material profiles
Enable automatic support generation
Use multi-color features for color changes
Adjust layer height based on model complexity
Save custom profiles for frequently used settings

📊 General Slicer Tips for All Software

Getting Smooth Curved Top Surfaces

Increase top layer count to 5-7 layers minimum
Use smaller layer heights (0.15mm or 0.1mm) for curves
Enable ironing feature if available
Use adaptive/variable layer height for curves
Choose appropriate top fill pattern (Concentric for organic shapes)
Reduce print speed on top layers (30-40 mm/s)

Minimizing Layer Lines & Seams

Use smaller layer heights (0.1-0.15mm) for visible surfaces
Set seam position strategically (sharpest corner, rear, or random)
Enable adaptive/variable layer height
Use sanding and post-processing for critical parts
Consider orientation to hide seams on less visible faces
Use “Vase Mode” or “Spiralize” for single-wall prints

Optimal Support Settings

Top Distance: 0.2-0.3mm (1-2 layers) – critical for easy removal
Bottom Distance: 0.2-0.3mm – prevents support from fusing to model
Support Interface: Enable with 0.2mm spacing for clean separation
Support Density: 10-15% – enough support, easy removal
Support Pattern: Grid or Zigzag for stability
Tree/Organic Supports: Use when available – much easier removal
Support Overhang Angle: 45-50 degrees – only support what’s necessary

Support Removal Tips

Let print cool completely before removing supports
Use flush cutters or pliers for initial removal
Use support interface layers for cleaner separation
Increase support Z-distance slightly if too difficult to remove
Consider breakaway supports or PVA for complex overhangs
Use tweezers for small support remnants

Filaments

21 December 2025 scouser

3D Printing Materials Guide

Comprehensive guide to materials, settings, and brand ratings

🟢 PLA (Polylactic Acid)

Best For: Beginners, general purpose printing, decorative items, prototypes

Properties

Print Temperature: 190-220°C (nozzle), 50-60°C (bed)
Strength: Moderate
Flexibility: Low (brittle)
Heat Resistance: Low (softens around 60°C)
Water Resistance: Low
UV Resistance: Moderate
Odor: Minimal (sweet smell when printing)

Print Settings

Setting	Value
Nozzle Temperature	200-210°C (optimal: 205°C)
Bed Temperature	60°C
Print Speed	50-60 mm/s
First Layer Speed	20-30 mm/s
Retraction Distance	1.5-2.5mm (direct drive), 4-6mm (Bowden)
Retraction Speed	40-50 mm/s
Cooling Fan	100% after first layer
Part Cooling	Essential for overhangs

Best Practices

Store in dry environment (use desiccant if humid)
No heated bed required, but 60°C improves adhesion
Use brim or raft for small parts or poor adhesion
Excellent for detailed prints with fine features
Easy to sand and post-process
Biodegradable under industrial composting conditions

Top Filament Brands (2024-2025 Ratings)

Brand	Rating	Price Range	Notes
Sunlu	4.6/5.0	$15-20/kg	Excellent value, consistent quality, wide color selection
Bambu Labs	4.8/5.0	$20-25/kg	Premium quality, excellent for Bambu printers, consistent
Flashforge	4.5/5.0	$18-22/kg	Good quality, reliable, good for Flashforge printers
Hatchbox	4.7/5.0	$20-25/kg	Consistent quality, reliable, popular choice
Overture	4.6/5.0	$18-22/kg	Good value, consistent, includes build surface
Polymaker	4.7/5.0	$22-28/kg	Premium quality, excellent for technical prints
eSun	4.5/5.0	$16-20/kg	Good budget option, reliable

🔴 ABS (Acrylonitrile Butadiene Styrene)

Best For: Functional parts, high-temperature applications, automotive parts

Properties

Print Temperature: 240-260°C (nozzle), 90-100°C (bed)
Strength: High
Flexibility: Moderate
Heat Resistance: High (up to 100°C)
Water Resistance: High
UV Resistance: Low (degrades in sunlight)
Odor: Strong (requires ventilation)

Print Settings

Setting	Value
Nozzle Temperature	240-260°C (optimal: 250°C)
Bed Temperature	90-100°C
Print Speed	40-50 mm/s
First Layer Speed	20-30 mm/s
Retraction Distance	2.0-3.0mm (direct), 5-7mm (Bowden)
Retraction Speed	40 mm/s
Cooling Fan	0-20% (minimal to prevent warping)
Enclosure	Required (prevents warping and cracking)

Best Practices

Enclosure Required: Must use enclosed printer or build enclosure
Ventilation: ABS emits fumes – use in well-ventilated area
Bed Adhesion: Use ABS slurry, hairspray, or PEI sheet
Warping Prevention: Use brim (5-10mm), keep chamber warm
Post-Processing: Can be acetone smoothed for glossy finish
Storage: Keep dry, ABS absorbs moisture

⚠️ Warning: ABS emits potentially harmful fumes. Always print in a well-ventilated area or use an enclosure with filtration. Not recommended for bedrooms or living spaces.

Top Filament Brands

Brand	Rating	Price Range	Notes
Polymaker	4.7/5.0	$25-30/kg	Excellent quality, low warping, consistent
Hatchbox	4.6/5.0	$22-28/kg	Reliable, good value, consistent
Sunlu	4.5/5.0	$18-22/kg	Good budget option, decent quality

🔵 PETG (Polyethylene Terephthalate Glycol)

Best For: Functional parts, outdoor use, food-safe applications, mechanical parts

Properties

Print Temperature: 240-250°C (nozzle), 70-80°C (bed)
Strength: High
Flexibility: Moderate (more flexible than PLA)
Heat Resistance: Moderate (up to 80°C)
Water Resistance: Excellent
UV Resistance: Good
Odor: Minimal

Print Settings

Setting	Value
Nozzle Temperature	240-250°C (optimal: 245°C)
Bed Temperature	70-80°C
Print Speed	40-50 mm/s
First Layer Speed	20-30 mm/s
Retraction Distance	2.0-3.0mm (direct), 5-7mm (Bowden)
Retraction Speed	35-40 mm/s (slower than PLA)
Cooling Fan	30-50% (moderate cooling)

Best Practices

More stringing than PLA – tune retraction carefully
Sticks well to PEI, glass, or textured beds
Can be difficult to remove from build plate – let cool completely
Excellent layer adhesion – very strong prints
Good for parts requiring chemical resistance
Can be transparent/translucent in some formulations

Top Filament Brands

Brand	Rating	Price Range	Notes
Overture	4.7/5.0	$20-25/kg	Excellent quality, consistent, good value
Polymaker	4.8/5.0	$25-30/kg	Premium quality, excellent clarity options
Sunlu	4.6/5.0	$18-22/kg	Good value, reliable, wide selection
eSun	4.5/5.0	$18-22/kg	Good budget option, consistent

⚪ PC (Polycarbonate)

Best For: High-strength parts, high-temperature applications, transparent parts

Properties

Print Temperature: 270-310°C (nozzle), 100-120°C (bed)
Strength: Very High
Flexibility: Low (brittle)
Heat Resistance: Very High (up to 120°C)
Water Resistance: Excellent
UV Resistance: Excellent
Odor: Moderate

Print Settings

Setting	Value
Nozzle Temperature	270-310°C (optimal: 290°C)
Bed Temperature	100-120°C
Print Speed	30-40 mm/s (slow)
First Layer Speed	15-20 mm/s
Retraction Distance	2.0-3.0mm
Cooling Fan	0% (no cooling – prevents cracking)
Enclosure	Required (high bed temp, prevents warping)

Best Practices

High Temperature Required: Need all-metal hotend (PTFE tube will degrade)
Enclosure Essential: Prevents warping and layer separation
Dry Filament: Must be completely dry – use filament dryer
Bed Adhesion: Use PC-compatible adhesive or PEI at high temp
Slow Printing: Print slowly to ensure proper layer bonding
Post-Processing: Can be annealed for increased strength

⚠️ Advanced Material: PC requires high temperatures and specialized equipment. Not recommended for beginners. Ensure your printer can handle 270°C+ temperatures.

Top Filament Brands

Brand	Rating	Price Range	Notes
Polymaker	4.8/5.0	$35-45/kg	Premium quality, excellent for technical applications
Prusament	4.7/5.0	$40-50/kg	High quality, consistent, premium price

🟡 TPU (Thermoplastic Polyurethane) – Flexible

Best For: Flexible parts, gaskets, phone cases, wearables

Properties

Print Temperature: 220-230°C (nozzle), 50-60°C (bed)
Strength: Moderate
Flexibility: Very High (rubber-like)
Heat Resistance: Low
Water Resistance: Good
Shore Hardness: 85A-95A (varies by brand)

Print Settings

Setting	Value
Nozzle Temperature	220-230°C
Bed Temperature	50-60°C
Print Speed	20-30 mm/s (very slow)
Retraction Distance	0.5-1.0mm (minimal) or disable
Retraction Speed	20-30 mm/s (slow)
Flow Rate	95-100% (reduce slightly)
Direct Drive	Highly recommended

Best Practices

Direct Drive Preferred: Bowden tubes can cause issues with flexible filament
Slow Speed: Print very slowly to prevent jams
Minimal Retraction: Too much retraction causes jams
Dry Filament: TPU absorbs moisture – keep dry
No Supports: Avoid supports when possible (difficult to remove)
Bed Adhesion: Sticks well to PEI or textured surfaces

Top Filament Brands

Brand	Rating	Price Range	Notes
Overture	4.6/5.0	$25-30/kg	Good quality, reliable, various hardness options
Polymaker	4.7/5.0	$30-35/kg	Premium quality, consistent
NinjaTek	4.8/5.0	$35-45/kg	Premium flexible filaments, various formulations

📊 Material Comparison Summary

Material	Difficulty	Strength	Flexibility	Heat Resistance	Best Use Case
PLA	⭐ Easy	⭐⭐⭐ Moderate	⭐ Low	⭐ Low	General purpose, beginners
PETG	⭐⭐ Moderate	⭐⭐⭐⭐ High	⭐⭐ Moderate	⭐⭐ Moderate	Functional parts, outdoor
ABS	⭐⭐⭐ Hard	⭐⭐⭐⭐ High	⭐⭐ Moderate	⭐⭐⭐⭐ High	High-temp, functional
PC	⭐⭐⭐⭐ Very Hard	⭐⭐⭐⭐⭐ Very High	⭐ Low	⭐⭐⭐⭐⭐ Very High	High-strength, high-temp
TPU	⭐⭐⭐ Hard	⭐⭐ Moderate	⭐⭐⭐⭐⭐ Very High	⭐ Low	Flexible parts, gaskets

💡 Pro Tip: Always store filaments in airtight containers with desiccant to prevent moisture absorption. Moisture causes poor print quality, stringing, and layer adhesion issues. Consider investing in a filament dryer for materials like PETG, TPU, and PC.

Flashforge AD5X

21 December 2025 scouser

Flashforge AD5X – Detailed Review & Guide

Flashforge AD5X

Multi-Color, Multi-Material 3D Printer – Comprehensive Review & Guide

Price (USD) $599

Price (GBP) £549

Rating 4.7/5.0 ⭐⭐⭐⭐⭐

📋 Overview & Reviews

Last Updated: Based on reviews from the last 12 months (2024-2025)

Key Features

Multi-color and multi-material printing capability
Automatic bed leveling system
Enclosed build chamber for better temperature control
Touchscreen interface
Wi-Fi connectivity
Print volume: 220 x 200 x 200 mm

Community Reviews & Feedback

Positive Aspects:

Excellent print quality with multi-color capabilities
Reliable automatic bed leveling
Good build quality and sturdy construction
User-friendly interface and setup process
Effective material switching system

Areas for Improvement:

Print volume could be larger for some users
Material waste during color changes
Some users report occasional clogging with certain materials
Price point is higher than basic single-color printers

🎯 Best Practices for Flashforge AD5X

Initial Setup

Ensure the printer is on a stable, level surface
Run the automatic bed leveling sequence before first print
Calibrate the Z-offset carefully for optimal first layer
Check all connections and ensure build plate is clean
Update firmware to the latest version

Daily Maintenance

Clean the build plate with isopropyl alcohol before each print
Check nozzle for clogs and clean if necessary
Inspect and clean the material feed system regularly
Monitor first layer adhesion on each print
Keep the build chamber clean from debris

Material Handling

Store filaments in a dry environment (consider a dry box)
Use high-quality filaments to reduce clogging issues
When switching materials, ensure proper purging between colors
Monitor material levels during long prints

🖥️ Recommended Slicers

The Flashforge AD5X works best with the following slicers:

FlashPrint (Official): Optimized specifically for Flashforge printers with built-in profiles
Cura: Popular choice with good community support and customizable settings
PrusaSlicer: Excellent for advanced users with fine control over print settings
SuperSlicer: Great for users who want maximum customization

⚙️ Optimal Slicer Settings

General Quality Settings

Setting	Recommended Value	Notes
Layer Height	0.2mm (standard), 0.15mm (high quality)	Balance between quality and speed
First Layer Height	0.3mm	Better adhesion
Print Speed	50-60 mm/s	Reduce to 30-40 mm/s for first layer
Travel Speed	150 mm/s	Faster travel reduces stringing
Retraction Distance	1.5-2.0 mm	Adjust based on material
Retraction Speed	40-50 mm/s	Prevents stringing

Curved Top Surfaces (Top Layer Quality)

Top Layer Count: 5-7 layers for smooth surfaces
Top Surface Skin Layers: 2-3 layers
Ironing: Enable for ultra-smooth top surfaces (Cura)
Ironing Flow: 5-10%
Ironing Speed: 30-50 mm/s
Top Surface Pattern: Concentric or Lines for best results

Minimizing Layer Lines & Seams

Seam Position: Set to “Random” or “Aligned” based on model
Z-Seam Alignment: Use “Sharpest Corner” to hide seams
Layer Height: Use smaller layer heights (0.15mm or 0.1mm) for less visible lines
Adaptive Layer Height: Enable to vary layer height based on geometry
Variable Layer Height: Use thicker layers on straight sections, thinner on curves

Support Settings for Easy Removal

Setting	Recommended Value
Support Type	Tree supports (Cura) or Organic supports (PrusaSlicer)
Support Overhang Angle	45-50 degrees
Support Top Distance	0.2-0.3mm (1-2 layers)
Support Bottom Distance	0.2-0.3mm
Support Interface	Enable with 0.2mm spacing
Support Density	10-15% for most prints
Support Pattern	Grid or Zigzag

Tips for Support Removal:

Use support interface layers for easier removal
Increase support Z-distance slightly if supports are too difficult to remove
Consider using breakaway supports or PVA for complex overhangs
Print supports at lower density (10%) to reduce material usage and ease removal

🔧 Calibration Guide

Bed Leveling

Heat the bed to printing temperature (60°C for PLA)
Run the automatic bed leveling sequence from the printer menu
Manually verify leveling using a piece of paper at all four corners
Adjust Z-offset until paper has slight resistance when moving
Test with a first layer calibration print

Extruder Calibration

Mark 120mm of filament from the extruder entry point
Extrude 100mm through the printer menu
Measure the remaining filament
Calculate: New E-steps = (Old E-steps × 100) / Actual Extruded
Update E-steps in printer firmware or slicer

Temperature Calibration

Print a temperature tower for each new material
Test range: 190-220°C for PLA, 240-260°C for PETG
Choose temperature with best layer adhesion and surface quality
Document optimal temperatures for each filament brand

Flow Rate Calibration

Print a single-wall calibration cube
Measure wall thickness with calipers
Adjust flow rate: New Flow = (Expected Width / Actual Width) × 100
Re-test until wall thickness matches expected value

⚠️ Common Issues & Solutions

Stringing

Solution: Increase retraction distance to 2.0-2.5mm
Solution: Increase retraction speed to 45-50 mm/s
Solution: Enable “Wipe while retracting” in slicer
Solution: Reduce print temperature by 5-10°C
Solution: Increase travel speed to minimize time between layers

Lack of Adhesion (First Layer Issues)

Solution: Clean build plate thoroughly with isopropyl alcohol
Solution: Adjust Z-offset to be closer to bed (reduce gap)
Solution: Increase first layer temperature by 5-10°C
Solution: Reduce first layer speed to 20-30 mm/s
Solution: Use adhesion aids: hairspray, glue stick, or PEI sheet
Solution: Ensure bed temperature is correct (60°C for PLA, 80°C for PETG)

Support Issues

Solution: Increase support top/bottom distance to 0.3mm
Solution: Use tree supports for better removal
Solution: Reduce support density to 10%
Solution: Enable support interface for easier removal
Solution: Adjust support overhang angle to 50 degrees

Layer Shifting

Solution: Check belt tension and tighten if loose
Solution: Reduce print speed, especially for tall prints
Solution: Ensure printer is on stable surface
Solution: Check for mechanical obstructions

Clogging

Solution: Use high-quality, dry filament
Solution: Perform cold pulls to clear clogs
Solution: Check nozzle temperature is appropriate for material
Solution: Clean nozzle regularly with wire brush
Solution: Ensure proper material flow and no kinks in filament

Warping

Solution: Use enclosed chamber (keep doors closed)
Solution: Increase bed temperature
Solution: Use brim or raft for better adhesion
Solution: Avoid drafts and temperature fluctuations
Solution: Consider using ABS-specific settings or switch to PETG

📊 Material-Specific Recommendations

PLA

Temperature: 200-210°C nozzle, 60°C bed
Speed: 50-60 mm/s
Retraction: 1.5-2.0mm at 40-50 mm/s
Best Brands: Sunlu, Flashforge, Bambu Labs, Hatchbox

PETG

Temperature: 240-250°C nozzle, 80°C bed
Speed: 40-50 mm/s
Retraction: 2.0-3.0mm at 35-40 mm/s
Best Brands: Sunlu, Overture, Polymaker

ABS

Temperature: 240-260°C nozzle, 90-100°C bed
Speed: 40-50 mm/s
Retraction: 2.0-3.0mm at 40 mm/s
Note: Requires enclosed chamber, good ventilation

TPU (Flexible)

Temperature: 220-230°C nozzle, 50-60°C bed
Speed: 20-30 mm/s (slow)
Retraction: Minimal (0.5-1.0mm) or disable
Note: Use direct drive if possible, reduce flow rate

Total eclipse of the sun.

20 October 2019 scouser

Way back in March 2006 (29th to be precise) I was lucky enough to witness one of the most spectacular events seen anywhere on the planet. I was in the Turkish seaside town of Kaş and this is what I saw. It’s quite eerie and the drop in temperature during totality was quite significant

I had to go looking for one of my old websites on the wayback machine to find the images. That cost me hours of my time reading & reminiscing but well worth it just to find these images again. The original memory card & hard drive having gone to the digital graveyard a long time ago.

Installing PHP onto your NginX server

7 October 2019 scouser

Our web server is currently pretty useless at the moment so let’s make it a bit more useful.

Enter the following command into your terminal.

sudo apt-get install php7.3-fpm php7.3-mysql php7.3-xmlrpc php7.3-curl php7.3-gd php-imagick php7.3-imap -y

Now we need to enable php in NginX. To do so we need to make some changes to the NginX settings, Type the following command into your terminal to edit the settings file.

sudo nano /etc/nginx/sites-available/default

Find the line that contains the following

index index.html index.htm index.nginx-debian.html;

Edit the line so it looks like this

index index.php index.html index.htm;

Now scroll down to find the section that begins with something like this

# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
# location ~ \.php$ {

Edit the section so it looks like this

# pass PHP scripts to FastCGI server
#
location ~ \.php$ {
        include snippets/fastcgi-php.conf;

#       # With php-fpm (or other unix sockets):
        fastcgi_pass unix:/var/run/php/php7.3-fpm.sock;
        fastcgi_split_path_info ^(.+\.php)(/.+)$;
#       # With php-cgi (or other tcp sockets):
#       fastcgi_pass 127.0.0.1:9000;
}

Now you can save the config file (ctrl-s ctrl-x) and tell NginX to reload it with the following command

sudo service nginx reload

You should now create a simple PHP file to check if the setup is working correctly. To do this, type in the following command.

sudo nano /var/www/html/index.php

You need to now add the following code to your newly created file:-

<?php phpinfo(); ?>

Now save the file (ctrl-s ctrl-x)

Finally, you can now view your dynamically created web page by entering the IP address of your server (the one you noted when you installed NginX) into your browser. If you have forgotten it, you can enter the command

ifconfig

again and locate the IP address on the line that starts with inet. The IP address should start with 192.168. Entering this IP address should now show you a page something like this.

This shows PHP is installed correctly

Prev < Build a Raspberry-Pi Webserver

« 1 2 3 4 »